Geira 4-in-1 Multi-Function Facial Machine - Diamond Microdermabrasion + Ultrasound + Hot and Cold Hammer + Facial Exfoliation Skin Scrubber by Silver Spa

Silver Spa
LM-316001   F-332
Salon/Spa Price: $1,199.00 $839.30 Sale
Shipping calculated at checkout.

Geira 4-in-1 Multi-Function Facial Machine - Diamond Microdermabrasion + Ultrasound + Hot and Cold Hammer + Facial Exfoliation Skin Scrubber. The Geira is an attractive instrument that combines 4 functions in a single machine:

Functions:

  • Diamond microdermabrasion for noninvasive and controlled exfoliation treatments
  • Ultrasound used to improve cellular metabolism
  • Hot and cold hammer to smooth skin after microdermabrasion treatments and enhancing skin product absorption
  • Skin Scrubber facial exfoliation tool with spatula applicator

Instructions:

  1. Plug in.
  2. Connect the accessories properly to the front/rear panel as indicated in the manual.
  3. Turn on the "POWER" button.
  4. Press "FUNCTION" to select the desired function in the following order: Skin Scrubber, Ultrasonic, Diamond Dermabrasion, Cold & Hot Hammer.

Skin Scrubber Use:

  1. Place the bracelet around the customer's wrist.
  2. Apply the appropriate conductive product generously to the surface of the skin.
  3. Select the desired wave type by pressing "STATE", the desired output energy by pressing "ENERGY" and time of working by pressing "TIMER". You can change setting anytime during the procedure.
  4. Press "START/PAUSE" button to start. Once there is circuit between the client and the scrubber, the machine will start to work. The Scrubber sign on the screen will run when machine is working normally. Once there is separation between the scrubber and the client, machine will pause, and the Scrubber sign on the screen will stop running.
ULTRASOUND USE:
Before treatment...
  1. Cleanse/tone the treatment area using the prescribed skin-type products.
  2. Remove any left-over product by facial steam for 10 minutes.
  3. Cleanse the treatment area again to remove any dirt or debris from the face in order to prevent the ultrasound waves from pushing it back into the dermis.
  4. Tone every part of the face (or treatment area) gently using a suitable astringent.
  5. After wiping off the astringent, the skin will be thoroughly cleansed for optimum protection.
  6. Apply enough conductive gel to the treatment area
Starting treatment...
  1. Select the desired ultrasonic probe by pressing "SELECT", wave type by pressing "STATE", the desired output energy by pressing "ENERGY" and time of working by pressing "TIMER". You can change setting anytime during a procedure.
  2. Press "START/PAUSE" button to start.

Diamond Dermabrasion Use:

  1. Correctly connect one side of the pipe to the rear panel as indicated in the sketch.
  2. Connect the opposite side of the pipe to the vacuum handle. Place the correct diamond head in the handle. There are nine types of diamond heads.
  3. Check that the foam filter is in its proper position in the handle.
  4. Check that the metal filter is in its proper position in the handle.
  5. You can adjust the suction effect by covering or uncovering the hole in the side of the handle with your finger.
  6. Select the desired energy and time. You can change setting anytime during a procedure.
  7. Press "START/PAUSE" button to start.

Hot & Cold Hammer Use:

  1. Press "STATE" to select between cold or hot function.
  2. According to the needs, adjust the output temperature by pressing "ENERGY" and desired time of operation by pressing "TIMER".
  3. Press "START/PAUSE" to start working.


DIAMOND MICRODERMABRASION MACHINES