Sea Shells For Massage, Various Sizes / Colors, Approx 30 Shells

Pure Spa Direct
VW-126081   230 0263
Salon/Spa Price: $304.49
Shipping calculated at checkout.

Sea Shells For Massage, Various Sizes / Colors, Approx 30 Shells. Hot Massage Shells Just imagine combining the exfoliation of a salt glow and the heat of a stone massage with the beauty of the sea. These beautiful shells are filled and sealed to maximize heat retention and then smoothed and poly coated to provide a textured but non-abrasive exfoliative massage. Heat them in a wet bath similar to basalt stones to the ideal temperature of 125 degrees Fahrenheit (no hotter than 140°) and then place them strategically on the patient to begin a warm transfer of heat. Add your favorite cream, lotion or oil and alternate massaging your client with your hands together with the shells as a massage tool.

These all natural shells of varied colors and sizes deliver deep therapeutic sensations of comfort and warmth. This kit contains approximately 6 lbs of beautiful shells and an instruction book.

Features:

  • Provides deep relaxation
  • Increases circulation, lymphy, and vitality
  • Promotes the release of toxins
  • Irons out tight muscles
  • Relieves sinus pressure
  • Gently exfoliates the skin

    General Guidelines for doing Shell Massage:
  • Only use a heating unit that is able to maintain temperature of 120° - 140#7176 F
  • Fill the heating unit with water so shells are completely covered. Allow for at least 1 hour heating time prior to your session. It is recommended to use a hand towel on the bottom of the heating unit to reduce the sound of the shell touching & to protect the bottom of your heating unit from scratches
  • If the shells are too hot for you to touch, they are too hot for your client. Always ask your client whether the temperature of the shells is comfortable. Adjust the temperature as needed and/or add a pillow case in between the client and the shell
  • A thermometer should always be used to determine the temperature of the shells
  • Have a small dish of ice water available next to the heater in case the shells are too hot
  • Gently shake off excess water from the shells prior to putting them on the client
  • Clean stones between sessions and at the end of the day

    Cleaning Instructions

    During the Day:
    The shells need to be cleaned between each sessions. To do this you must take your container of used shells to a sink and sanitize them with anti-bacterial soap. Thoroughly mix the soap with the shells so that they are completely sanitized. Rinse them again before placing them back into the heating unit. Fill the heating unit with water and reset to the recommended temperature. You may want to sprinkle a tiny amount of sea salt into the final rinse water to clear the energy.

    At the End of the Day:
    Turn off the heating unit, remove the shells and place them in hot water with anti-bacterial soap. Wash and rinse them individually. Place them individually on a towel to dry. Empty the heating bin, wipe it with anti-bacterial soap and spray with alcohol and wipe dry. Return the bin to the heating unit and replace the shells into the bin. Do not fill with water or turn on the heating unit until you are ready to use the shells for the next session.
    • ▶ See More Products From: Pure Spa Direct