 |
ViBrowLash 8.5" x 11" Stand Up Counter SignLet your clients know you offer ViBROWLASH Professional Lash and Brow Tinting with this stand-up counter display. 8.5" x 11"
VIEW ALL PRODUCTS BY VIBROWLASH
BEFORE APPLYING THIS PRODUCT, YOU MUST PERFORM A SENSITIVITY TEST.
This product contains ingredients that may cause skin irritation on certain individuals and a preliminary test should be made first according to accompanying directions.
Using a 1:1 ratio, mix the Vibrowlash Color Cream with the Vibrowlash Activator and place 2 small dabs on the inner arm, just above the elbow. Wait 2 minutes, and then gently wipe off with a dry cloth. Wait 24 to 48 hours. If no irritation or inflammation is apparent, it is usually assumed that no hypersensitivity to the product exists. The test must be carried out before each application. If there is any redness or irritation, DO NOT OFFER THE TREATMENT TO THE CLIENT, AND PUT HER/HIM IN YOUR RECORDS AS BEING SENSITIVE AND NOT ALLOWED TO RECEIVE IT.
FOR USE BY PROFESSIONALS ONLY:
Regulations vary state to state. Check with your state board before performing this service
CLIENT PROTECTION:
- Drape client appropriately for lash and brow color service. If your client is wearing contact lenses, ask if he or she would like to remove them prior to the service.
- Client should be sitting upright with head slightly tilted back. DO NOT fully recline the client's head because this will increase the risk of color product getting into their eyes.
PRODUCT APPLICATION:
- Prepare for product application by cleansing the eye and/or brow area with Vibrowlash Oil-Free Makeup Remover. The lashes and/or brows should be completely dry and free of oil and makeup prior to the color service. Apply skin protectant to skin surrounding eye and for brow area(s) to avoid staining.
- Shake the Vibrowlash Activator before each use. Temperature fluctuation can cause settlement of the product but has no negative effect on the performance of the color. Always store this product in a cool place.
- Mix a 1:1 ratio of Vibrowlash Color Cream and Vibrowlash Activator and stir until the consistency is a creamy paste. The color of the mixture is not the color that the hair will be after processing.
- Begin color application(s), If applying color to both lash and brow areas, begin with lash application as detailed in Step 7. Apply color product to brows as described in Step 11 while client's eyes are completely closed, AFTER lash color has been applied. If applying color to brows only, you may skip to Step 11 now.
- To begin LASH COLOR application, place a protective eye pad under the lower lash area on top of the skin protectant. The skin protectant will prevent skin staining and will keep the protective pad in place during product application.
- Using the Vibrowlash Application Brush, mascara wand, or disposable lipstick brush, apply the Vibrowlash Color Cream mixture to lower lashes first on both eyes. As you begin lower lash application, instruct the client to look up.
- Make sure the activated Vibrowlash Color Cream covers lashes evenly from base to tip, including lashes at the corners of the eyes. When lower lashes for both eyes are completed, instruct the client to close his or her eyes until the application and removal process is complete.
- Apply Vibrowlash Color Cream mixture to upper lashes from base to tip. D0 NOT press color product into lash area during application. Use light, even strokes to cover lashes with the Vibrowlash Application Brush, mascara wand, or disposable lipstick brush.
- To begin BROW COLOR application, make sure the eyebrow hair is completely dry and free of oil and makeup. Apply skin protectant as needed. Instruct client to keep eyes closed until procedure is complete. Apply product to brow, but DO NOT press the activated Vibrowlash Color Cream into the skin and DO NOT apply product thick enough to drip.
- If Vibrowlash Color Cream accidently gets in the eyes, take your client to an eyewash station and flush eyes with plain water immediately! If you do not have an eyewash station, flush the eyes with saline solution or warm water and pat dry. DO NOT RUB EYES. If no irritation occurs, you may reapply the Color immediately. Eyes must be free of redness or irritation to proceed.
- If any Vibrowlash Color Cream gets on the face or in eye area, remove it with warm soap and water as soon as possible. DO NOT use the Vibrowlash Clean Up directly on facial skin, lashes, eyelids, or eye area.
- Processing time will differ depending on temperature fluctuation, the texture and coarseness of the client's hair, and the hair's original color. LASH processing time is 8-10 minutes. BROW processing time is 3 minutes.
- When processing is complete, remove protection pads from under lower lash area.
- While the client's eyes remain closed, remove color product with a downward motion. Use round cotton pads dampened with warm water and very light pressure. Hold tissue under lower lash and/or below brow to capture any excess moisture while gently removing color product with cotton pads.
- If you get Vibrowlash Color Cream on your hands, use a cotton ball dampened with Vibrowlash Clean Up to remove it. Wash your hands with soap and water immediately
NOTE: Occasionally you may notice oxidation of the Vibrowlash Color Cream near the cap. If this occurs, squeeze out the oxidized portion of the Vibrowlash Color Cream and discard it. Using oxidized Vibrowlash Color Cream could cause undesired color results.
 VIEW ALL PRODUCTS BY VIBROWLASH
|
|
 |